NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTS
sda 8:0 0 167.7G 0 disk
|-sda1 8:1 0 500M 0 part
|-sda2 8:2 0 128M 0 part
|-sda3 8:3 0 151.4G 0 part
|-sda4 8:4 0 1.2G 0 part
|-sda5 8:5 0 13.5G 0 part
`-sda6 8:6 0 1.1G 0 part
sdb 8:16 0 1.8T 0 disk
`-sdb1 8:17 0 1.8T 0 part
sdc 8:32 1 57.7G 0 disk
`-sdc1 8:33 1 57.7G 0 part

That was what I have.

Again, the sdb does not show up when I run cfdisk

Im still trying to output the dmesg to a file so i can read it.

I'll see if i can find anything in var/log/messages next time.

I appreciate everyones efforts

---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: output of lsblk
By: Bogomips to All on Tue May 13 2025 08:20 am

Im still trying to output the dmesg to a file so i can read it.

'dmesg | less' no?
--
digital man (rob)

Steven Wright quote #32:
The colder the x-ray table, the more of your body is required to be on it. Norco, CA WX: 64.4øF, 54.0% humidity, 2 mph WNW wind, 0.00 inches rain/24hrs

---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: output of lsblk
By: Digital Man to Bogomips on Tue May 13 2025 11:51 am

Im still trying to output the dmesg to a file so i can read it.

'dmesg | less' no?

yes also 'dmesg | more'

thank you, i was trying it backwards as well as trying to grep into a file. Either way, I was able to find the solution to my initial problem. Thanks to help i found here.

Now I can log in here, switch to a different terminal. try the command and switch back. That's one of the things I love about slack.

---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

On Tue, 13 May 2025 12:39:17 -0700
"Bogomips" (VERT) <VERT!Bogomips@endofthelinebbs.com> wrote:

Now I can log in here, switch to a different terminal. try the
command and switch back. That's one of the things I love about slack.

That's a linux thing, not a slack thing. Actaully, SCO Unix also had
virtual terminals. I'm sure others did too.
--
End Of The Line BBS - Plano, TX
telnet endofthelinebbs.com 23

---
* Synchronet * End Of The Line BBS - endofthelinebbs.com

Bogomips wrote to All <=-

@MSGID: <68236351.18496.dove-hlp@vert.synchro.net>
NAME MAJ:MIN RM SIZE RO TYPE
MOUNTPOINTS sda 8:0 0 167.7G 0
disk |-sda1 8:1 0 500M 0 part

|-sda2 8:2 0 128M 0 part
|-sda3 8:3 0 151.4G 0 part
|-sda4 8:4 0 1.2G 0 part
|-sda5 8:5 0 13.5G 0 part

`-sda6 8:6 0 1.1G 0 part
sdb 8:16 0 1.8T 0 disk
`-sdb1 8:17 0 1.8T 0 part
sdc 8:32 1 57.7G 0 disk
`-sdc1 8:33 1 57.7G 0 part

That was what I have.

Again, the sdb does not show up when I run cfdisk

Im still trying to output the dmesg to a file so i can read it.

I'll see if i can find anything in var/log/messages next time.

I appreciate everyones efforts

The 2TB drive IS there, its /dev/sdb. It has a 1.8TiB partition.

When you start cfdisk, you need to specify the disk to use as a command line parameter. It defaults to /dev/sda, which is why you are only seeing that disk. Thats all it was!


Start cfdisk like this

/sbin/cfdisk /dev/sdb

or
sudo /sbin/cfdisk /dev/sdb

However you start it, ALL you need to do is just add /dev/sdb as a parameter. and you'll be editing /dev/sdb.

Alternatively, you can try GParted.

I suspected that it was something like that.

... BoraxMan
--- MultiMail/Linux v0.49
þ Synchronet þ MS & RD BBs - bbs.mozysswamp.org