Greetings All!

Looks like my via line is still wrong in netmail... So no matter what aka I use to send netmail it puts my fido addy in the via line.. it seemed to work correctly when sending netmail to scinet and I havent confirmed that it doest but fsxnet it is putting my fido addy in instead of my fsxnet aka. I suspect this might be an error in routing? I have tried every combination I can think of and have received help with suggestions from some of you but cant seem to solve it...


----
Regards,


Rick Smith (Nitro)

... Because of BBSing, reading and writing actually pay off!
--- GoldED+/LNX 1.1.5-b20180707
* Origin: ----> Abacus Sysop Point --->>>>bbs.abon.us:2323 (1:340/202.1)

Hi Rick!

08 Nov 2020 21:12, from Rick Smith -> All:

Looks like my via line is still wrong in netmail... So no matter what
aka I use to send netmail it puts my fido addy in the via line.. it
seemed to work correctly when sending netmail to scinet and I havent confirmed that it doest but fsxnet it is putting my fido addy in
instead of my fsxnet aka. I suspect this might be an error in
routing?

How should it be a routing issue? (if you send out the wrong Via)
I assume it is a config issue on your side.
Check the husky tparser output, I am quit sure that you missed somewhere something in your config ;)

CU, Ricsi

... Life is not about how high you climb, but how well you bounce.
--- GoldED+/LNX
* Origin: When your work speaks for itself, don't interrupt. (2:310/31)

Greetings Richard!

Monday November 09 2020 14:19, you wrote to me about an urgent matter!:

Hi Rick!

08 Nov 2020 21:12, from Rick Smith -> All:

How should it be a routing issue? (if you send out the wrong Via)
I assume it is a config issue on your side.
Check the husky tparser output, I am quit sure that you missed
somewhere something in your config ;)

Oh because other sysops have looked over the cfgs and routing was the only issue or possible issue Identified... I have run tparser I dont see anything that has "errors" but there are pages and pages of output... I have it in a txt file if you wish to see it...


----
Regards,


Rick Smith (Nitro)

... TAGLINES.BBS Taglines About BBSing
--- GoldED+/LNX 1.1.5-b20180707
* Origin: ----> Abacus BBS! --->>>>bbs.abon.us:2323 (1:340/202)

Hello Rick!

08 Nov 20, Rick Smith wrote to All:

Looks like my via line is still wrong in netmail... So no matter what
aka I use to send netmail it puts my fido addy in the via line.

Fix the other end then. Integrate fsxnet into the fidonet zone 1 structure and you can use the existing infrastructure and via lines. ;)

Do you have a catch all routing in your config? What kind of flag does have your mail and your route config? I'm not sure if a catch all fetches another zones mail and send it to the catch all destination. If your scinet is working i would compare the scinet config to the fsxnet and try to adjust fsxnet identically.

Regards

Kai

--- GoldED+/LNX 1.1.4.7
* Origin: Monobox (2:240/77)

Hi Rick!

09 Nov 2020 08:29, from Rick Smith -> Richard Menedetter:

I have run tparser I dont see anything that has "errors" but there are pages and pages of output...
I have it in a txt file if you wish to see it...

Usually it is somewhere were you entered your fido address, but it should be the address of the othernet there.
I am part of multiple othernets and have no issue.
So I am quit sure it is a wrong configuration on your side.

Sorry ... I currently do not have the time to go through your config.
(And also beware because I think the tparser output contains also the passwords!)

Just look for places where it should use the othernet info, but you have entered the fido info there.

CU, Ricsi

... The only one who got everything done by Friday was Robinson Crusoe.
--- GoldED+/LNX
* Origin: Sandwich: A faulty attempt to make both ends meat. (2:310/31)