I am just wondering if anyone is having the same issue I am with NetSerial... I am running V 4.34 64Bit with Windows 10 64Bit... and about 95% of the time after I reboot I have to uninstall and reinstall NetSerial because the VModem won't initialize... Do nothing more than uninstall and reinstall and it starts working again...

IB Joe
AKA Joe Schweier
SysOp of Joe's BBS
-=JoesBBS.com=-
--- Mystic BBS v1.12 A47 2021/01/16 (Raspberry Pi/32)
* Origin: JoesBBS.Com, Telnet:2323 SSH:2222 HTTP:80 (1:342/201)

Re: NetSerial
By: IB Joe to All on Mon May 10 2021 10:03 am

95% of the time after I reboot I have to uninstall and reinstall NetSerial because the VModem won't initialize... Do nothing more than uninstall and reinstall and it starts working again...

Are you certain you don't have somthing else using the same actual or virtual serial port?
===
Underminer - The Undermine BBS
--- SBBSecho 3.14-Linux
* Origin: The Undermine - bbs.undermine.ca (1:134/101)

On 10 May 2021, Underminer said the following...

Re: NetSerial
By: IB Joe to All on Mon May 10 2021 10:03 am

95% of the time after I reboot I have to uninstall and reinstall NetS because the VModem won't initialize... Do nothing more than uninstall reinstall and it starts working again...

Are you certain you don't have somthing else using the same actual or virtual serial port?
===

I have put thought into this... and I have no clue... I have to unistall and reinstall... I don't have to enter the reg-codes because it remembers everything from the prior install... and then it works.

The only thing I haven't tried to do is use the 32Bit installer

IB Joe
AKA Joe Schweier
SysOp of Joe's BBS
-=JoesBBS.com=-
--- Mystic BBS v1.12 A47 2021/01/16 (Raspberry Pi/32)
* Origin: JoesBBS.Com, Telnet:2323 SSH:2222 HTTP:80 (1:342/201)

Are you certain you don't have somthing else using the same actual or virtual serial port?
===

I have put thought into this... and I have no clue... I have to unistall and reinstall... I don't have to enter the reg-codes because it remembers everything from the prior install... and then it works.

The only thing I haven't tried to do is use the 32Bit installer

Perhaps try opening device manager and see if you have anything else listed under your com ports. It sounds like a conflict to me.
--- SBBSecho 3.14-Linux
* Origin: The Undermine - bbs.undermine.ca (1:134/101)

Make sure that when you run the installation run it as administrator.
I had an app that wouldn't save the registration info after running
it and installing it as administrator fixed that problem.

Installing .MSI files as administrator can be tricky as you can't right
click it and select run as administrator so here is a link to help you. https://www.uc.solutions/Misc/Password_Sync/How_to_Run_.msi_Files_as_Adm inistrator

I am just wondering if anyone is having the same issue I am with NetSerial... I
am running V 4.34 64Bit with Windows 10 64Bit... and about 95% of the time after I reboot I have to uninstall and reinstall NetSerial because the VModem
won't initialize... Do nothing more than uninstall and reinstall and it starts
working again...

IB Joe
AKA Joe Schweier
SysOp of Joe's BBS
-=JoesBBS.com=-
--- Mystic BBS v1.12 A47 2021/01/16 (Raspberry Pi/32)
* Origin: JoesBBS.Com, Telnet:2323 SSH:2222 HTTP:80 (1:342/201)

--- Platinum Xpress/Win/WINServer v7.0
* Origin: TECHWARE BBS - Since 1995 - www.techware.dynip.com/ (1:102/401)