• CRLF

    From Carlos Navarro@2:341/234.1 to All on Sunday, March 13, 2022 09:55:39
    It seems that OpenXP inserts CRLF (#13#10) at the end of every line in the body text of packed messages, including kludges.

    In FTS-4000 (http://ftsc.org/docs/fts-4000.001) we can read:
    ============
    The <LF> and soft <CR> characters (character codes 10 and 141
    respectively) should not be used within a control pragraph.
    ============

    For better compatibility with all FTN software, I suggest that OpenXP is changed so that it strips LF characters (#10) and leaves only CR (#13) when it generates PKTs - if not in all the body text, at least in the kludge lines.

    Carlos

    --- GoldED+/W32-MSVC 1.1.5-b20180707
    * Origin: Costa Blanca, Spain (2:341/234.1)
  • From Martin Foster@2:310/31.3 to Carlos Navarro on Monday, March 14, 2022 11:21:00
    Hello Carlos!

    *** Sunday 13.03.22 at 09:55, Carlos Navarro wrote to All:

    It seems that OpenXP inserts CRLF (#13#10) at the end of every line in
    the body text of packed messages, including kludges.

    Yes it does.

    In FTS-4000 (http://ftsc.org/docs/fts-4000.001) we can read:
    ============
    The <LF> and soft <CR> characters (character codes 10 and 141
    respectively) should not be used within a control pragraph.
    ============

    Here's the *full* paragraph to which you refer:
    ---------- 8< ----------
    The <LF> and soft <CR> characters (character codes 10 and 141
    respectively) should not be used within a control pragraph. If they
    are, they should be disregarded by any program processing such a
    message or copies thereof.
    ---------- 8< ----------

    And then there's this: **********************************************************************
    FTSC FIDONET TECHNICAL STANDARDS COMMITTEE **********************************************************************

    Publication: FTS-4000
    Revision: 1
    Title: CONTROL PARAGRAPHS
    Author(s): FTSC

    Revision Date: 1 October 2000
    Expiry Date: 1 October 2002 ----------------------------------------------------------------------
    Looks like the document is no longer valid.

    For better compatibility with all FTN software, I suggest that OpenXP is changed so that it strips LF characters (#10) and leaves only CR (#13) when it generates PKTs - if not in all the body text, at least in the kludge lines.

    The only person who could address your suggestion would be the developer
    but he doesn't monitor this echo :((

    Regards,
    Martin

    --- OpenXP 5.0.51
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)
  • From Carlos Navarro@2:341/234.1 to Martin Foster on Friday, March 18, 2022 21:10:11
    14 Mar 2022 11:21, you wrote to me:

    Here's the *full* paragraph to which you refer:
    ---------- 8< ----------
    The <LF> and soft <CR> characters (character codes 10 and 141
    respectively) should not be used within a control pragraph. If they
    are, they should be disregarded by any program processing such a
    message or copies thereof.
    ---------- 8< ----------

    Yes, programs should ignore it. But better not to have LFs there, if possible. They serve no purpose anyway.

    And then there's this: ********************************************************************** FTSC FIDONET TECHNICAL STANDARDS COMMITTEE **********************************************************************

    Publication: FTS-4000
    Revision: 1
    Title: CONTROL PARAGRAPHS
    Author(s): FTSC

    Revision Date: 1 October 2000
    Expiry Date: 1 October 2002 ---------------------------------------------------------------------- Looks like the document is no longer valid.

    FTS-4000 is listed in ftsc.org/docs - Standards section. I see no replacement for it, so I guess it's just that it hasn't been updated. (I may ask about this in FTSC_PUBLIC.)

    For better compatibility with all FTN software, I suggest that
    OpenXP is changed so that it strips LF characters (#10) and
    leaves only CR (#13) when it generates PKTs - if not in all the
    body text, at least in the kludge lines.

    The only person who could address your suggestion would be the
    developer but he doesn't monitor this echo :((

    Is the developer (gsandner) in Fidonet? If not, I suppose that the place to make suggestions is the SF repo.

    Carlos

    --- GoldED+/W32-MSVC 1.1.5-b20180707
    * Origin: Costa Blanca, Spain (2:341/234.1)
  • From Martin Foster@2:310/31.3 to Carlos Navarro on Saturday, March 19, 2022 09:04:00
    Hello Carlos!

    *** Friday 18.03.22 at 21:10, Carlos Navarro wrote to Martin Foster:

    [snip]
    And then there's this:
    **********************************************************************
    FTSC FIDONET TECHNICAL STANDARDS COMMITTEE
    **********************************************************************

    Publication: FTS-4000
    Revision: 1
    Title: CONTROL PARAGRAPHS
    Author(s): FTSC

    Revision Date: 1 October 2000
    Expiry Date: 1 October 2002
    ----------------------------------------------------------------------
    Looks like the document is no longer valid.

    FTS-4000 is listed in ftsc.org/docs - Standards section. I see no replacement for it, so I guess it's just that it hasn't been updated. (I may ask about this in FTSC_PUBLIC.)

    Please do ;)

    For better compatibility with all FTN software, I suggest that
    OpenXP is changed so that it strips LF characters (#10) and
    leaves only CR (#13) when it generates PKTs - if not in all the
    body text, at least in the kludge lines.

    The only person who could address your suggestion would be the
    developer but he doesn't monitor this echo :((

    Is the developer (gsandner) in Fidonet?

    Yes, he has a Point address, which is listed in the Z2 Pointlist. However,
    he doesn't take an active part in Fido, he uses his Point address mainly
    for testing purposes.

    If not, I suppose that the place to make suggestions is the SF repo.

    Hmmm, that's the last place I would try to make contact!

    FYI .....
    The official support channel for CrossPoint and *ALL* of its major derivatives is the Usenet newsgroup "de.comm.software.crosspoint".

    The newsgroup is also "gated" to the following Google Group: https://groups.google.com/g/de.comm.software.crosspoint

    It is also gated via the Fido echo XPOINT, which originates from Tommi Koivula's system(not sure which AKA he uses for this).

    Take your pick :-)

    Please note that somebody(not me) forwarded your original post to the newsgroup on the same day that you posted it in here but so far, it has received nil response.

    See my netmail for the rest of my reply .....

    Regards,
    Martin

    --- OpenXP 5.0.51
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)
  • From Tommi Koivula@2:221/6 to Carlos Navarro on Saturday, March 19, 2022 18:26:48
    Hi Carlos.

    19 Mar 22 09:04, Martin Foster wrote to you:

    The newsgroup is also "gated" to the following Google Group: https://groups.google.com/g/de.comm.software.crosspoint

    It is also gated via the Fido echo XPOINT, which originates from Tommi Koivula's system(not sure which AKA he uses for this).

    The gate runs at 2:221/10, but the echo (xpoint) is available at 2:341/66, so you can link it there. It is also available at my nntp servers.

    Take your pick :-)

    Exactly! :)

    'Tommi

    --- GoldED+/LNX 1.1.5-b20210627
    * Origin: nntps://news.fidonet.fi (2:221/6)
  • From Carlos Navarro@2:341/234.1 to Tommi Koivula on Wednesday, March 23, 2022 17:58:38
    19 Mar 2022 18:26, you wrote to me:

    It is also gated via the Fido echo XPOINT, which originates from
    Tommi Koivula's system(not sure which AKA he uses for this).

    The gate runs at 2:221/10, but the echo (xpoint) is available at
    2:341/66, so you can link it there. It is also available at my nntp servers.

    Got it, thanks.

    Carlos

    --- GoldED+/W32-MSVC 1.1.5-b20180707
    * Origin: Costa Blanca, Spain (2:341/234.1)
  • From Carlos Navarro@2:341/234.1 to Martin Foster on Wednesday, March 23, 2022 18:07:59
    19 Mar 2022 09:04, you wrote to me:

    The official support channel for CrossPoint and *ALL* of its major derivatives is the Usenet newsgroup "de.comm.software.crosspoint".

    The newsgroup is also "gated" to the following Google Group: https://groups.google.com/g/de.comm.software.crosspoint

    It is also gated via the Fido echo XPOINT, which originates from Tommi
    Koivula's system(not sure which AKA he uses for this).

    Thanks for the info.

    Carlos

    --- GoldED+/W32-MSVC 1.1.5-b20180707
    * Origin: Costa Blanca, Spain (2:341/234.1)
  • From Marc Lewis@1:396/45 to Martin Foster on Thursday, March 24, 2022 05:56:23
    Hello Martin.

    <On 19Mar2022 09:04 Martin Foster (2:310/31.3) wrote a message to Carlos Navarro regarding CRLF >

    [snip]
    The only person who could address your suggestion would be the
    developer but he doesn't monitor this echo :((

    Is the developer (gsandner) in Fidonet?

    Yes, he has a Point address, which is listed in the Z2 Pointlist.
    However, he doesn't take an active part in Fido, he uses his
    Point address mainly for testing purposes.
    [snip]

    Martin, it's really disappointing that a developer of FidoNet Point software takes no part in the Echo or doesn't have an Echo dedicated to his software. IMO, this doesn't speak highly of that software's continuing development. :( Hopefully I'm wrong.

    I remember many years ago, Harvey Parisien who developed PPoint, not only participated here, but I believe was one of the "founders" of the POINTS Echo with a full Node as well as a Point until he retired from FidoNet years later. I still contact him from time-to-time to chat. I took over moderatorship of the echo when he retired - and that's been YEARS ago.

    Best regards,
    Marc

    ... The shortest distance between two points is usually under construction.
    --- timEd/2 1.10.y2k+
    * Origin: Sursum Corda! BBS-Huntsville,AL-bbs.sursum-corda.com (1:396/45)
  • From August Abolins@2:221/1.58 to Marc Lewis on Thursday, March 24, 2022 08:21:00
    Hello Marc!

    ** On Thursday 24.03.22 - 05:56, you wrote to Martin:

    Martin, it's really disappointing that a developer of
    FidoNet Point software takes no part in the Echo or
    doesn't have an Echo dedicated to his software. IMO, this
    doesn't speak highly of that software's continuing
    development. :( Hopefully I'm wrong.

    Fido's XPOINT echo serves to bridge communications to Gunter
    with the newsgroup. OpenXP supports nntp, and that's what
    Gunter seems to prefer using.


    I remember many years ago, Harvey Parisien who developed
    PPoint, not only participated here, but I believe was one
    of the "founders" of the POINTS Echo with a full Node as
    well as a Point until he retired from FidoNet years later.
    I still contact him from time-to-time to chat. I took over
    moderatorship of the echo when he retired - and that's
    been YEARS ago.

    Harvey.. is he the fellow who built some fax program for OS/2?


    --
    ../|ug

    --- OpenXP 5.0.51
    * Origin: The ONLY point that matters! --> . <-- (2:221/1.58)
  • From Carlos Navarro@2:341/234 to Martin Foster on Thursday, March 24, 2022 17:21:10
    19 Mar 2022 09:04, you wrote to me:

    Publication: FTS-4000
    [...]
    Expiry Date: 1 October 2002
    ----------------------------------------------------------------
    ------ Looks like the document is no longer valid.

    FTS-4000 is listed in ftsc.org/docs - Standards section. I see no
    replacement for it, so I guess it's just that it hasn't been
    updated. (I may ask about this in FTSC_PUBLIC.)

    Please do ;)

    Done. :-) It hasn't been updated, but didn't expire.

    Carlos

    --- GoldED+/W32-MSVC 1.1.5-b20180707
    * Origin: cyberiada (2:341/234)
  • From Martin Foster@2:310/31.3 to Marc Lewis on Friday, March 25, 2022 08:58:00
    Hello Marc!

    *** Thursday 24.03.22 at 05:56, Marc Lewis wrote to Martin Foster:

    [snip]
    The only person who could address your suggestion would be the
    developer but he doesn't monitor this echo :((

    Is the developer (gsandner) in Fidonet?

    Yes, he has a Point address, which is listed in the Z2 Pointlist.
    However, he doesn't take an active part in Fido, he uses his
    Point address mainly for testing purposes.
    [snip]

    Martin, it's really disappointing that a developer of FidoNet Point software takes no part in the Echo or doesn't have an Echo dedicated
    to his software.

    Yes, it *is* disappointing but that's the way it is and it has actually worked surprisingly well.

    IMO, this doesn't speak highly of that software's continuing
    development. :( Hopefully I'm wrong.

    FYI ...
    The current developer appeared totally out of the blue just over 8 years
    ago and since then, he's pushed out a staggering 50+ releases! If that's
    not continuing development, I don't know what is :)

    Regards,
    Martin

    --- OpenXP 5.0.51
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)
  • From Martin Foster@2:310/31.3 to Carlos Navarro on Friday, March 25, 2022 09:02:00
    Hello Carlos!

    *** Thursday 24.03.22 at 17:21, Carlos Navarro wrote to Martin Foster:

    Publication: FTS-4000
    [...]
    Expiry Date: 1 October 2002
    ^^^^^^^^^^^^ ^^^^^^^^^^^^^^

    ----------------------------------------------------------------
    ------ Looks like the document is no longer valid.

    FTS-4000 is listed in ftsc.org/docs - Standards section. I see no
    replacement for it, so I guess it's just that it hasn't been
    updated. (I may ask about this in FTSC_PUBLIC.)

    Please do ;)

    Done. :-)

    Yeah, seen it thanks.

    It hasn't been updated, but didn't expire.

    Ummmmmmmm, the document has expired - Period!

    Regards,
    Martin

    --- OpenXP 5.0.51
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)