• linpoint

    From ALAN@1:135/392 to ALL on Tuesday, August 30, 2022 08:31:46
    OK,

    I got it to take my typing in "unzip $DOWNFILE" to pass the packer stage.

    Now it crashes.

    Can I run ./configure or rebuild it? I think I put my point address
    somewhere is should not have been

    Ala
    --- Platinum Xpress/Win/WINServer v3.0pr5
    * Origin: Fidonet Since 1991 www.doccyber.org bbs.docsplace.org (1:135/392)
  • From Martin Foster@2:310/31.3 to ALAN on Wednesday, August 31, 2022 13:39:00
    Hello Alan!

    *** Tuesday 30.08.22 at 08:31, Alan wrote to ALL:

    I got it to take my typing in "unzip $DOWNFILE" to pass the packer stage.

    Excellent! :)

    Now it crashes.

    Can you be a bit more specific please.

    Where/when does it crash?
    Did you notice any error messages anywhere?
    What were you doing immediately before the crash?
    Are you able to reproduce the crash?

    If you're able to reproduce the crash, can you post the steps needed to reproduce it.

    Can I run ./configure or rebuild it?

    No need for such dramatic action.

    I think I put my point address somewhere is should not have been

    What makes you think that?

    Regards,
    Martin

    --- OpenXP 5.0.56
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)
  • From ALAN@1:135/392 to MARTIN FOSTER on Thursday, September 01, 2022 07:10:16
    Martin,

    Thanks so much for your help. I value your patience.

    I will make notes and get back to you today.

    Cheers,

    Alan


    Hello Alan!

    *** Tuesday 30.08.22 at 08:31, Alan wrote to ALL:

    I got it to take my typing in "unzip $DOWNFILE" to pass the packer stage.

    Excellent! :)

    Now it crashes.

    Can you be a bit more specific please.

    Where/when does it crash?
    Did you notice any error messages anywhere?
    What were you doing immediately before the crash?
    Are you able to reproduce the crash?

    If you're able to reproduce the crash, can you post the steps needed to reproduce it.

    Can I run ./configure or rebuild it?

    No need for such dramatic action.

    I think I put my point address somewhere is should not have been

    What makes you think that?

    Regards,
    Martin

    --- OpenXP 5.0.56
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)

    --- Platinum Xpress/Win/WINServer v3.0pr5
    * Origin: Fidonet Since 1991 www.doccyber.org bbs.docsplace.org (1:135/392)
  • From ALAN@1:135/392 to MARTIN FOSTER on Sunday, September 04, 2022 07:16:54
    Hello Alan!

    *** Tuesday 30.08.22 at 08:31, Alan wrote to ALL:

    I got it to take my typing in "unzip $DOWNFILE" to pass the packer stage.

    Excellent! :)

    Now it crashes.

    Can you be a bit more specific please.

    When I open the program it goes through the packer (unzip $Downfile.)



    Where/when does it crash?

    When I press N follows by S a white box flashes and then the program exits.

    Wish I could find a log.


    Did you notice any error messages anywhere?
    After staring at the screen and hitting S I see a white box and once I saw "open channel" in the box.

    What were you doing immediately before the crash?

    Pressing S for Single call.

    Are you able to reproduce the crash?


    Yes.

    If you're able to reproduce the crash, can you post the steps needed to reproduce it.


    Network - Single
    Can I run ./configure or rebuild it?

    No need for such dramatic action.

    I think I put my point address somewhere is should not have been

    Memory Not the case.

    Followed your docs on the install.

    Have been experimenting by turning things on/off then resetting on thierf

    not working.

    Thanks in advance Martin

    Alan

    What makes you think that?

    Regards,
    Martin

    --- OpenXP 5.0.56
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)

    --- Platinum Xpress/Win/WINServer v3.0pr5
    * Origin: Fidonet Since 1991 www.doccyber.org bbs.docsplace.org (1:135/392)
  • From Martin Foster@2:310/31.3 to ALAN on Monday, September 05, 2022 11:42:00
    Hello Alan!

    *** Sunday 04.09.22 at 07:16, Alan wrote to MARTIN FOSTER:

    [snip]
    Wish I could find a log.

    Have a look at this:

    ~/.openxp/debuglog.txt

    This can grow quite BIG during a session but it gets overwritten after
    every start of OpenXP. In light of this, the best course of action would
    be to start OpenXP, do a Netcall/Single straight away and then exit OpenXP immediately. Copy the new debuglog.txt(before it gets overwritten at the
    next start) and then take a look to see if you can spot anything that
    might give us a clue.

    Regards,
    Martin

    --- OpenXP 5.0.56
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)
  • From ALAN@1:135/392 to MARTIN FOSTER on Monday, September 05, 2022 15:16:24
    The OS was wiped and I am starting fresh. I know two major points to fix.

    I will follow you April 29 instructions.

    Alan



    Hello Alan!

    *** Sunday 04.09.22 at 07:16, Alan wrote to MARTIN FOSTER:

    [snip]
    Wish I could find a log.

    Have a look at this:

    ~/.openxp/debuglog.txt

    This can grow quite BIG during a session but it gets overwritten after every start of OpenXP. In light of this, the best course of action would
    be to start OpenXP, do a Netcall/Single straight away and then exit OpenXP immediately. Copy the new debuglog.txt(before it gets overwritten at the next start) and then take a look to see if you can spot anything that
    might give us a clue.

    Regards,
    Martin

    --- OpenXP 5.0.56
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)

    --- Platinum Xpress/Win/WINServer v3.0pr5
    * Origin: Fidonet Since 1991 www.doccyber.org bbs.docsplace.org (1:135/392)
  • From ALAN@1:135/392 to MARTIN FOSTER on Monday, September 05, 2022 16:10:20
    Hello Alan!

    *** Sunday 04.09.22 at 07:16, Alan wrote to MARTIN FOSTER:

    [snip]
    Wish I could find a log.

    Have a look at this:

    Finished install.

    Current fault..............

    White open box, static.

    "Fidomailer
    Openning comm channel"

    Will do log thing later. I think I'm getting somewhere.

    Alan






    ~/.openxp/debuglog.txt

    This can grow quite BIG during a session but it gets overwritten after every start of OpenXP. In light of this, the best course of action would
    be to start OpenXP, do a Netcall/Single straight away and then exit OpenXP immediately. Copy the new debuglog.txt(before it gets overwritten at the next start) and then take a look to see if you can spot anything that
    might give us a clue.

    Regards,
    Martin

    --- OpenXP 5.0.56
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)

    --- Platinum Xpress/Win/WINServer v3.0pr5
    * Origin: Fidonet Since 1991 www.doccyber.org bbs.docsplace.org (1:135/392)