1. Forum
  2. FidoNet
  3. POINTS

  • Read/Unread list message on WinPoint Veleno

    From Martin Foster@2:310/31.3 to Thomas Bampi on Thursday, October 15, 2020 11:04:50
    Hello Thomas!

    *** Thursday June 11 2020 16:47, you wrote to me:

    Nope and for the moment, I've given up on it because no matter
    what changes I make to the theme file, my changes don't seem to
    "stick".

    Example:
    I changed the quote colour from "Yellow on Black" to "Green on
    Black" and added the line which is supposed to change the
    default colour of unread messages to Cyan on Black.

    After restarting GoldED, the quote colour is still Yellow on
    Black and
    unread messages are shown in Green on Black ???

    Hi Martin, I allowed myself to log in with your account to double
    check everything and the parameters you have entered are correct and
    the system works. Now I put the colors red on black and actually if I
    go to one of your linked areas I ask for the list of messages with the
    "L" key. The unread ones I see them in the color I have chosen. I
    noticed that you had the theme nr. 10 this only works if you choose
    your own theme and not with the others!

    OK, four months later and I've finally found the time to have another look at this but during those four months, something's changed. I can load my golded colour config file into the text editor but I cannot navigate my way through the file. If I press the <Down-Arrow> key I would expect the cursor to move down to the next line but it doesn't move at all. Instead, it outputs a high-ascii character to the console. Same thing happens if I press the <Page-Down> key - Huh!

    I'll attach a screenshot to a netmail and crash it to your system, please check your inbound.

    Regards,
    Martin

    --- GoldED+/W32-MSVC 1.1.5-b20180707
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)
  • From F. Krueger@2:333/808.1 to Martin Foster on Thursday, October 15, 2020 20:25:26
    Hello, Martin Foster.
    On 15/10/20 11:04 you wrote:

    OK, four months later and I've finally found the time to have
    another look at this but during those four months, something's
    changed. I can load my golded colour config file into the text
    editor but I cannot navigate my way through the file. If I press
    the <Down-Arrow> key I would expect the cursor to move down to the
    next line but it doesn't move at all. Instead, it outputs a
    high-ascii character to the console. Same thing happens if I press
    the <Page-Down> key - Huh! I'll attach a screenshot to a netmail
    and crash it to your system, please check your inbound.
    Ok as soon as I receive your netmail I will look at the problem while I try to see where the problem lies

    Bye
    Thomas
    --
    Best regards!
    Posted using Hotdoged on Android
    --- Hotdoged/2.13.5/Android
    * Origin: Veleno BBS - http://www.velenobbs.net (2:333/808.1)
  • From Martin Foster@2:310/31.3 to F. Krueger on Saturday, October 17, 2020 11:04:00
    Hello F.!

    *** Thursday 15.10.20 at 20:25, F. Krueger wrote to Martin Foster:

    OK, four months later and I've finally found the time to have
    another look at this but during those four months, something's
    changed. I can load my golded colour config file into the text
    editor but I cannot navigate my way through the file. If I press
    the <Down-Arrow> key I would expect the cursor to move down to the
    next line but it doesn't move at all. Instead, it outputs a
    high-ascii character to the console. Same thing happens if I press
    the <Page-Down> key - Huh! I'll attach a screenshot to a netmail
    and crash it to your system, please check your inbound.
    Ok as soon as I receive your netmail I will look at the problem while I try to see where the problem lies

    I sent it direct(crash) to your system on Thursday at 10:30(UTC) but there was a problem sending the f'attach, so I sent it again at 10:56(UTC). Look
    in your inbound for "t_editor.zip".

    Regards,
    Martin

    --- OpenXP 5.0.47
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)
  • From Martin Foster@2:310/31.3 to F. Krueger on Tuesday, October 20, 2020 11:36:59
    Hello Thomas!

    *** Thursday October 15 2020 20:25, you wrote to me:

    OK, four months later and I've finally found the time to have
    another look at this but during those four months, something's
    changed. I can load my golded colour config file into the text
    editor but I cannot navigate my way through the file. If I press
    the <Down-Arrow> key I would expect the cursor to move down to
    the next line but it doesn't move at all. Instead, it outputs a
    high-ascii character to the console. Same thing happens if I
    press the <Page-Down> key - Huh! I'll attach a screenshot to a
    netmail and crash it to your system, please check your inbound.
    Ok as soon as I receive your netmail I will look at the problem while
    I try to see where the problem lies

    As you now know, the problem was being caused by Firefox but it was a case of "here today, gone tomorrow".

    Regards,
    Martin

    --- GoldED+/W32-MSVC 1.1.5-b20180707
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)
  • From August Abolins@2:333/808.7 to F. Krueger on Sunday, November 01, 2020 15:56:48
    Hi Thomas!

    Just wanted to point out that I am noticing this warning message (at the top) at every login and at every R)eceive and S)end:

    http://pics.rsh.ru/img/velenobadcommand2_yuz8k4za.jpg



    --- GoldED+/W32-MINGW 1.1.5-b20180707
    * Origin: ----> Point Of VeleNo BBs (http://www.velenobbs.net) (2:333/808.7)
  • From F. Krueger@2:333/808.1 to August Abolins on Monday, November 02, 2020 07:18:36
    Hello, August Abolins.
    On 01/11/20 15:56 you wrote:

    Hi Thomas! Just wanted to point out that I am noticing this
    warning message (at the top) at every login and at every R)eceive
    and S)end: http://pics.rsh.ru/img/velenobadcommand2_yuz8k4za.jpg
    --- GoldED+/W32-MINGW 1.1.5-b20180707 * Origin: ----> Point Of
    VeleNo BBs (http://www.velenobbs.net) (2:333/808.7)
    Hi August thanks I check the files but golded doesn't start?

    Bye
    Freddy
    --
    Best regards!
    Posted using Hotdoged on Android
    --- Hotdoged/2.13.5/Android
    * Origin: Veleno BBS - http://www.velenobbs.net (2:333/808.1)
  • From August Abolins@2:333/808.7 to F. Krueger on Monday, November 02, 2020 14:21:33
    Hi F!

    02 Nov 20 07:18, you wrote to me:

    http://pics.rsh.ru/img/velenobadcommand2_yuz8k4za.jpg

    Hi August thanks I check the files but golded doesn't start?

    It eventually does. But I just wondered about the error message at the top? Seems like there is a warning about an invalid command in your batch file?


    --- GoldED+/W32-MINGW 1.1.5-b20180707
    * Origin: ----> Point Of VeleNo BBs (http://www.velenobbs.net) (2:333/808.7)
  • From F. Krueger@2:333/808.1 to August Abolins on Tuesday, November 03, 2020 13:36:35
    Hello, August Abolins.
    On 02/11/20 14:21 you wrote:

    Hi F! 02 Nov 20 07:18, you wrote to me:
    http://pics.rsh.ru/img/velenobadcommand2_yuz8k4za.jpg
    Hi August thanks I check the files but golded doesn't start?
    It eventually does. But I just wondered about the error message at
    the top? Seems like there is a warning about an invalid command in
    your batch file?
    Hi August I solved the problem, thanks for the warning

    Bye
    Freddy
    --
    Best regards!
    Posted using Hotdoged on Android
    --- Hotdoged/2.13.5/Android
    * Origin: Veleno BBS - http://www.velenobbs.net (2:333/808.1)