• Why use a Point, and recommendations

    From Dan Clough@1:135/115 to All on Wednesday, May 31, 2023 21:40:00
    Hello all,

    Just started following this echo, as I may have an interest in setting
    up a point for reading mail. I have a few questions, and apologize if
    they've been asked before, which I'm sure they have...

    1. What pros/cons are there to using a Point, versus reading/writing
    echomail directly on a BBS, or with an Offline Reader. I operate a BBS,
    and have used offline mail readers for years. Just wondering how/if a
    point would be "better" in some way. What can it do for me that I can't currently do with my OLR (MultiMail)?

    2. I'm interested (only) in software for Linux. A glance through the existing messages here would seem to indicate that 'OpenXP' is the point software of choice. Pretty much true? Any alternatives to that?

    Thanks for taking some time to provide me some info/advice, and I look
    forward to participating here.



    ... System halted - Press all keys at once to continue.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.20-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)
  • From Alan Ianson@1:153/757 to Dan Clough on Wednesday, May 31, 2023 20:05:00
    Just started following this echo, as I may have an interest in setting
    up a point for reading mail. I have a few questions, and apologize if they've been asked before, which I'm sure they have...

    1. What pros/cons are there to using a Point, versus reading/writing echomail directly on a BBS, or with an Offline Reader. I operate a BBS,
    and have used offline mail readers for years. Just wondering how/if a
    point would be "better" in some way. What can it do for me that I can't currently do with my OLR (MultiMail)?

    I don't think there are any pros or cons.

    When running a point you poll your boss for new mail, much like you do with an OLR but the interface is different.

    2. I'm interested (only) in software for Linux. A glance through the existing messages here would seem to indicate that 'OpenXP' is the point software of choice. Pretty much true? Any alternatives to that?

    I use Aftershock on my phone. It's handy when I am away from home for netmail and a few echo's I want to stay in touch with. It comes in handy when I may not have a computer or OLR easily available.

    HotDoged is another option for a phone or a tablet.

    OpenXP is a good choice for a point setup on a computer with a TUI or WinPoint for a windows setup.

    --- BBBS/Li6 v4.10 Toy-6
    * Origin: The Rusty MailBox - Penticton, BC Canada (1:153/757)
  • From Dan Clough@1:135/115 to Alan Ianson on Thursday, June 01, 2023 08:46:00
    Alan Ianson wrote to Dan Clough <=-

    Just started following this echo, as I may have an interest in setting
    up a point for reading mail. I have a few questions, and apologize if they've been asked before, which I'm sure they have...

    1. What pros/cons are there to using a Point, versus reading/writing echomail directly on a BBS, or with an Offline Reader. I operate a BBS,
    and have used offline mail readers for years. Just wondering how/if a
    point would be "better" in some way. What can it do for me that I can't currently do with my OLR (MultiMail)?

    I don't think there are any pros or cons.

    When running a point you poll your boss for new mail, much like
    you do with an OLR but the interface is different.

    Yes, okay.

    2. I'm interested (only) in software for Linux. A glance through the existing messages here would seem to indicate that 'OpenXP' is the point software of choice. Pretty much true? Any alternatives to that?

    I use Aftershock on my phone. It's handy when I am away from home
    for netmail and a few echo's I want to stay in touch with. It
    comes in handy when I may not have a computer or OLR easily
    available.

    HotDoged is another option for a phone or a tablet.

    Hmmm, both of those seem to be for Android only... I use an iPhone.
    Probably not something I'd care about doing anyway.

    OpenXP is a good choice for a point setup on a computer with a
    TUI or WinPoint for a windows setup.

    I may take a look at OpenXP. There are no Windows here. :-)

    Thanks for the info!



    ... Gone crazy, be back later, please leave message.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.20-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)
  • From August Abolins@2:221/1.58 to Dan Clough on Thursday, June 01, 2023 18:22:00
    Hello Dan!

    1. What pros/cons are there to using a Point, versus
    reading/writing echomail directly on a BBS, or with an
    Offline Reader. I operate a BBS, and have used offline
    mail readers for years. Just wondering how/if a point
    would be "better" in some way. What can it do for me that
    I can't currently do with my OLR (MultiMail)?

    Even running OpenXP as a point with your bbs locally would open
    up the wonderful reading/editing/searching/database
    functionality.

    See http://openxp.kolico.ca/sample-screenshots/ ..for
    screenshots.


    2. I'm interested (only) in software for Linux.

    A linux installation is supported.

    A glance through the existing messages here would seem to
    indicate that 'OpenXP' is the point software of choice.
    Pretty much true? Any alternatives to that?

    At first I was convinced that I would stick with a Win-GUI
    based point program. But when I was introduced to OpenXP, it
    became a wonderful journey of discovery of its feature-rich
    operation.
    --
    ../|ug

    --- OpenXP 5.0.57
    * Origin: The ONLY point that matters! --> . <-- (2:221/1.58)
  • From Dan Clough@1:135/115 to August Abolins on Thursday, June 01, 2023 20:43:00
    August Abolins wrote to Dan Clough <=-

    1. What pros/cons are there to using a Point, versus
    reading/writing echomail directly on a BBS, or with an
    Offline Reader. I operate a BBS, and have used offline
    mail readers for years. Just wondering how/if a point
    would be "better" in some way. What can it do for me that
    I can't currently do with my OLR (MultiMail)?

    Even running OpenXP as a point with your bbs locally would open
    up the wonderful reading/editing/searching/database
    functionality.

    See http://openxp.kolico.ca/sample-screenshots/ ..for
    screenshots.

    It does look pretty good, no doubt.

    2. I'm interested (only) in software for Linux.

    A linux installation is supported.

    A glance through the existing messages here would seem to
    indicate that 'OpenXP' is the point software of choice.
    Pretty much true? Any alternatives to that?

    At first I was convinced that I would stick with a Win-GUI
    based point program. But when I was introduced to OpenXP, it
    became a wonderful journey of discovery of its feature-rich
    operation.

    I'll give it a look. Thanks for the info.



    ... System halted - Press all keys at once to continue.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.20-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)
  • From Alan Beck@1:229/426.36 to Dan Clough on Friday, June 02, 2023 09:27:02
    //Hello Dan,//

    on *01.06.23* at *2:40:00* You wrote in area *POINTS*
    to *All* about *"Why use a Point, and recommendations"*.

    Hello all,

    Just started following this echo, as I may have an interest in setting up a point for reading mail. I have a few questions, and apologize if they've been asked before, which I'm sure they have...

    I have been a point for a while.

    1. What pros/cons are there to using a Point, versus reading/writing echomail directly on a BBS, or with an Offline Reader. I operate a BBS, and have used offline mail readers for years. Just wondering how/if a point would be "better" in some way. What can it do for me that I can't currently do with my OLR (MultiMail)?

    Being a point is great, you just poll your bossnode and the mail comes in, easy peasy.

    2. I'm interested (only) in software for Linux. A glance through the existing messages here would seem to indicate that 'OpenXP' is the point software of choice. Pretty much true? Any alternatives to that?

    Explore WinPoint, I use it and love it. You have to wrestle with font size but after that it is OK.

    At first glance it looks like a real email program with a full screen.

    OpenXP is a smaller user interface and I have found the keystrokes a bit cumbersome.

    In winpoint you can focus the message window and navigate using the arrow keys. I like that very much.

    you need a Bossnode to start with, unless you are one.

    You can reconfigure Winpoint as often as you like, untill you get it.

    you won't need to qwk again.

    I used qwk off and on for years.

    The BBS route was a way I wanted to go but I could not figure it out, being a point was the way to go for me.

    Thanks for taking some time to provide me some info/advice, and I look forward to participating here.



    ... System halted - Press all keys at once to continue.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.20-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)

    Regards,
    Alan Beck
    --- WinPoint 415.0
    * Origin: Original *WinPoint* Origin! (1:229/426.36)
  • From Dan Clough@1:135/115 to Alan Beck on Friday, June 02, 2023 08:50:00
    Alan Beck wrote to Dan Clough <=-

    1. What pros/cons are there to using a Point, versus reading/writing echomail directly on a BBS, or with an Offline Reader. I operate a BBS, and have used offline mail readers for years. Just wondering how/if a point would be "better" in some way. What can it do for me that I can't currently do with my OLR (MultiMail)?

    Being a point is great, you just poll your bossnode and the mail
    comes in, easy peasy.

    Yes, I understand that. But it's also easy to grab a QWK packet from
    (my) BBS and read/reply that way. So... point has no advantage there.

    2. I'm interested (only) in software for Linux. A glance through the existing messages here would seem to indicate that 'OpenXP' is the point software of choice. Pretty much true? Any alternatives to that?

    Explore WinPoint, I use it and love it. You have to wrestle with
    font size but after that it is OK.

    At first glance it looks like a real email program with a full
    screen.

    In winpoint you can focus the message window and navigate using
    the arrow keys. I like that very much.

    you need a Bossnode to start with, unless you are one.

    You can reconfigure Winpoint as often as you like, untill you get
    it.

    Ummmm.... did you miss the part above where I said I was *only*
    interested in Linux software?

    you won't need to qwk again.

    I like using QWK, and the whole point of my questions is to find out if operating as a Point would be any better. So far I've not seen any
    indication of that.

    Thanks for your reply...



    ... Gone crazy, be back later, please leave message.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.20-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)
  • From Alan Beck@1:229/426.36 to Dan Clough on Friday, June 02, 2023 21:40:29
    //Hello Dan,//

    I find your point comelling.

    What software do you use as a terminal to get the mail.

    I am very interested in that.

    Alan


    on *6/2/2023* at *13:50:00* You wrote in area *POINTS*
    to *Alan Beck* about *"Re: Why use a Point, and recommendations"*.

    Alan Beck wrote to Dan Clough <=-

    1. What pros/cons are there to using a Point, versus reading/writing
    echomail directly on a BBS, or with an Offline Reader. I operate a BBS,
    and have used offline mail readers for years. Just wondering how/if a
    point would be "better" in some way. What can it do for me that I can't
    currently do with my OLR (MultiMail)?

    Being a point is great, you just poll your bossnode and the mail comes
    in, easy peasy.

    Yes, I understand that. But it's also easy to grab a QWK packet from
    (my) BBS and read/reply that way. So... point has no advantage there.

    2. I'm interested (only) in software for Linux. A glance through the
    existing messages here would seem to indicate that 'OpenXP' is the point
    software of choice. Pretty much true? Any alternatives to that?

    Explore WinPoint, I use it and love it. You have to wrestle with font
    size but after that it is OK.

    At first glance it looks like a real email program with a full screen.

    In winpoint you can focus the message window and navigate using the
    arrow keys. I like that very much.

    you need a Bossnode to start with, unless you are one.

    You can reconfigure Winpoint as often as you like, untill you get it.

    Ummmm.... did you miss the part above where I said I was only interested in Linux software?

    you won't need to qwk again.

    I like using QWK, and the whole point of my questions is to find out if operating as a Point would be any better. So far I've not seen any indication of that.

    Thanks for your reply...



    ... Gone crazy, be back later, please leave message.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.20-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)

    Regards,
    Alan Beck
    --- WinPoint 415.0
    * Origin: Another Random *WinPoint* Origin! (1:229/426.36)
  • From Dan Clough@1:135/115 to Alan Beck on Friday, June 02, 2023 21:16:00
    Alan Beck wrote to Dan Clough <=-

    1. What pros/cons are there to using a Point, versus reading/writing
    echomail directly on a BBS, or with an Offline Reader. I operate a BBS,
    and have used offline mail readers for years. Just wondering how/if a
    point would be "better" in some way. What can it do for me that I can't
    currently do with my OLR (MultiMail)?

    Being a point is great, you just poll your bossnode and the mail comes
    in, easy peasy.

    Yes, I understand that. But it's also easy to grab a QWK packet from
    (my) BBS and read/reply that way. So... point has no advantage there.

    2. I'm interested (only) in software for Linux. A glance through the
    existing messages here would seem to indicate that 'OpenXP' is the point
    software of choice. Pretty much true? Any alternatives to that?

    Explore WinPoint, I use it and love it. You have to wrestle with font
    size but after that it is OK.

    <SNIP>

    Ummmm.... did you miss the part above where I said I was only interested in Linux software?

    you won't need to qwk again.

    I like using QWK, and the whole point of my questions is to find out if operating as a Point would be any better. So far I've not seen any indication of that.

    <Top-posting corrected>

    I find your point comelling.

    I don't know what that sentence means.

    What software do you use as a terminal to get the mail.

    I use Syncterm to log into my BBS and download a QWK packet, and then read/reply the packet using Offline Mail Reader software called
    Multimail.

    I am very interested in that.

    Okay... It's quite easy and works great.


    ... System halted - Press all keys at once to continue.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.20-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)
  • From August Abolins@2:221/1.58 to Dan Clough on Saturday, June 03, 2023 21:59:00
    Hello Dan!

    ** On Friday 02.06.23 - 08:50, you wrote to Alan Beck:

    Being a point is great, you just poll your bossnode and the mail
    comes in, easy peasy.

    Yes, I understand that. But it's also easy to grab a QWK packet from
    (my) BBS and read/reply that way. So... point has no advantage there.

    Pointing can be faster. With OXP, the command to poll are
    three keystrokes: N A <CR>


    I like using QWK, and the whole point of my questions is
    to find out if operating as a Point would be any better.
    So far I've not seen any indication of that.

    You just gotta give OXP a try to see what's different and/or
    better.

    For me, it's the database-like storage of messages following a
    poll. Unlike QWK were you have to keep track of each
    particular file and/or read/reply to all the messages in a
    single QWK at a time, the database result allows archiving
    messages all in one place and makes it easy to find any
    particular message.

    OXP allows marking individual messages for "later reply" or
    tagging them to HOLD so they don't get deleted on a purge.

    --
    ../|ug

    --- OpenXP 5.0.57
    * Origin: The ONLY point that matters! --> . <-- (2:221/1.58)
  • From Dan Clough@1:135/115 to August Abolins on Saturday, June 03, 2023 21:33:00
    August Abolins wrote to Dan Clough <=-

    Being a point is great, you just poll your bossnode and the mail
    comes in, easy peasy.

    Yes, I understand that. But it's also easy to grab a QWK packet from
    (my) BBS and read/reply that way. So... point has no advantage there.

    Pointing can be faster. With OXP, the command to poll are
    three keystrokes: N A <CR>

    Well, that's not a huge concern of mine. Doesn't take me much more than
    that to login to the BBS and grab a QWK packet.

    I like using QWK, and the whole point of my questions is
    to find out if operating as a Point would be any better.
    So far I've not seen any indication of that.

    You just gotta give OXP a try to see what's different and/or
    better.

    So, I did give it a look a couple days ago. I didn't get very far. I
    have to say, I cannot easily recall a piece of software that is less
    intuitive on how to use it, than this. Especially the opening dialog
    when you start it for the first time, I mean.... WTF? Really strange
    stuff there. Could I learn it with some time/study/reading? Sure. But
    there isn't anything that makes that worth my while, at this point.

    For me, it's the database-like storage of messages following a
    poll. Unlike QWK were you have to keep track of each
    particular file and/or read/reply to all the messages in a
    single QWK at a time, the database result allows archiving
    messages all in one place and makes it easy to find any
    particular message.

    Yes, understood, but if you run a BBS, you already have all that. I can
    see this being a decent option for a non-Sysop though.

    OXP allows marking individual messages for "later reply" or
    tagging them to HOLD so they don't get deleted on a purge.

    That doesn't fit how I'm used to doing things. It may suit others very
    well, I'm sure, but for me.... can't find any reason to switch to this
    from BBS/QWK. A big part of that is the learning curve on how to use
    it; I just don't have the time or desire for that, at least right now.

    Thanks for the response to my question(s), though, it's appreciated.




    ... System halted - Press all keys at once to continue.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.20-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)
  • From August Abolins@2:221/1.58 to Dan Clough on Sunday, June 04, 2023 08:43:00
    ** On Saturday 03.06.23 - 21:33, you wrote to me:

    Pointing can be faster. With OXP, the command to poll
    are three keystrokes: N A <CR>

    Well, that's not a huge concern of mine. Doesn't take me
    much more than that to login to the BBS and grab a QWK
    packet.

    I was "used to" doing the Syncterm + Multimail and/or Sempoint
    method too. The feeling was "OK.. this is BBSing and that's
    the way things get done". But OPX provided a different
    (primarily faster and including better message management)
    experience that I was looking for.


    So, I did give it a look a couple days ago. I didn't get
    very far. [...] Really strange stuff there. Could I learn
    it with some time/study/reading? Sure. But there isn't
    anything that makes that worth my while, at this point.

    Sorry to hear that. It's been a while (4 years now?) since I
    first launched OPX. My first version was many interations
    prior to the current version. I don't recall anything "less
    intuitive" about it. However, I *did* have the advantantage of
    a USER's GUIDE that a fellow OXP User/Tester wrote. That guide
    might still be helpful to a certain degree. I'd recommend you
    take a look at it. See https://openxp.uk/doc/


    For me, it's the database-like storage of messages
    following a poll. Unlike QWK were you have to keep track
    of each [...]

    Yes, understood, but if you run a BBS, you already have
    all that. I can see this being a decent option for a non-
    Sysop though.

    Right. Most sysops would see no point, pun intended, ;)
    ..since they've already vested a lot of time in managing a bbs.

    But OXP is not just an FTN reader. It can so NNTP, POP, IMAP
    and has modest built in GPG support too.


    That doesn't fit how I'm used to doing things. It may
    suit others very well, I'm sure, but for me.... can't
    find any reason to switch to this from BBS/QWK. A big
    part of that is the learning curve on how to use it; I
    just don't have the time or desire for that, at least
    right now.

    At the beginning, I had convinced myself that the only way I
    (as a user) was going to participate in BBS messaging was via a
    Windows GUI. I was revisiting Sempoint, for example. But
    honestly, the console UI of OXP gradually grew on me and it
    truly emerged as the best experience for me. There is an
    resistance to anything new and different.


    Thanks for the response to my question(s), though, it's
    appreciated.

    OK.
    --
    ../|ug

    --- OpenXP 5.0.57
    * Origin: The ONLY point that matters! --> . <-- (2:221/1.58)
  • From Ulrich Schroeter@2:240/1120 to Dan Clough on Sunday, June 04, 2023 15:50:48
    Hi Dan,

    31 May 23 21:40, from Dan Clough -> All, in URL area://POINTS?msgid=1068.fido_points@1:135/115+28dd3f1c:
    @BBSID: PALANTIR
    Hello all,

    Just started following this echo, as I may have an interest in setting
    up a point for reading mail. I have a few questions, and apologize
    if they've been asked before, which I'm sure they have...

    1. What pros/cons are there to using a Point, versus reading/writing echomail directly on a BBS, or with an Offline Reader. I operate a
    BBS, and have used offline mail readers for years. Just wondering
    how/if a point would be "better" in some way. What can it do for me
    that I can't currently do with my OLR (MultiMail)?

    2. I'm interested (only) in software for Linux. A glance through the
    existing messages here would seem to indicate that 'OpenXP' is the
    point software of choice. Pretty much true? Any alternatives to
    that?

    Thanks for taking some time to provide me some info/advice, and I look
    forward to participating here.

    currently you've probably only received responses from the Zone 1 perspective view. But there are also others ...

    First is the historical view ...
    back in the 80's and 90's as Fidonet starts increasing, this was the before-internet-time ... all Zone 1 had the so called local-area-calls with zero addtl. fees using local phone calls. You could start a phone call at first of the month and could be online 24/7 until the last day of the month without any addtl. fee except the base fee you've paid for your telephone provider.

    In Zone 2 it was totaly different. Beside the base fee you had to pay monthly, you've paid for every call time based. So every online minute counted up to a total amount fee you had to pay to your phone provider.
    To get an idea, I've compared back in the late 80's ... 1 coke did cost 1 USD In Germany the one coke did cost 1 DM. In relation to the phone bill, you had to pay every 5 minute approx 1 DM. To be one hour online, you had to pay addtl. 6 DM.

    Thats why BBS'sing becomes popular in the US but not in Europe. In Zone 2 you cannot calculate your online costs. Therefor, the Fidonet developed mechanisms to call a bossnode with minimum time, if the transfer speed becomes better, the less time was required to be online, that counts to your phone bill.
    Therefor Offline solutions spread in Zone 2 where in Zone 1 BBS'sing was your friend.

    As said, Offline solutions have been developed. One option was the QWK technique but this didn't only become popular be the users that are still most time online at BBS'ses. The Point solution becomes more popular in Zone 2 because each user still uses the technique, that connects different BBS'ses with mailers to exchange mails and files in the background.

    Point programs in the beginning uses exactly the same mailer, tossers, tickers, editors that Node system uses beside their running BBS

    Each BBS user works under the hood of a BBS sysop - mostly the Fidonet Node sysop. Fidonet technical they have no voice.
    Fidonet technical you have to apply for a nodenumber to get fidonet member and have becoming a voice.
    With a nodenumber, you can be uniquely identified by your fidonet aka.
    As QWK reader you're still running under your bossnodes main nodenumber. Starting with point you receive your unique Fidonet Point-AKA and becomes addressable in the fidonet.

    The are differences in the Point systems.
    Ones that are standalone systems (OpenXP, WinPoint) with their own dedicated messagebase structures.
    You cannot combine these message base with any known BBS systems message base or other fidonet compatible editors or tossers and tickers. They are standalone as is. Good for people who dont want continue to discover the world of Fidonet.
    Its only good to select some discussion channels, some fileechos and receive the traffic for them.

    The 2nd type of Point systems, are Point systems, that allow you to move forward with your journey to get a Fidonet Node member, add a BBS system to your running system, to play around with different tossers, tickers, netmail trackers. Playing around with a BBS system in the Background connected to your local messagebase that interchanges traffic with your bossnode.
    Once you've received the learning curve to apply for a Fidonet Nodenumber, you only switch the Pointnumber with your applied Nodenumber and continue running your system as before.
    With the mailer system you can also add othernets to your configuration to have a multilevel networking environment.
    With such a system you're probably able to switch from one OS system to another.
    Running BinkD mailer you can run your system on Windows, on Linux, on OS2
    maybe others. One of such combination of mailer, tosser, editor as point starter kit is the BinkD, HPT, GoldEd package.
    For Linux Philip Giebel deployed the Fidian package.
    For Windows long time there was the Fidopoint-Paket-Deluxe available for Windows, but failed the switch from Windows 32bit to Windows 64bit
    The heart of this package is the universal Tosser with the ability to support different types of FTN compatible message bases.
    Therefor this solution is the open-forward system with the best effort if you want to continue with your fidonet journey



    regards, uli ;-)
    --- GoldED-NSF/W32-MINGW 1.1.5-20090710
    * Origin: AMBROSIA - Bad Ueberkingen - Germany (2:240/1120)
  • From Dan Clough@1:135/115 to Ulrich Schroeter on Sunday, June 04, 2023 09:54:00
    Ulrich Schroeter wrote to Dan Clough <=-

    Just started following this echo, as I may have an interest in setting
    up a point for reading mail. I have a few questions, and apologize
    if they've been asked before, which I'm sure they have...

    1. What pros/cons are there to using a Point, versus reading/writing echomail directly on a BBS, or with an Offline Reader. I operate a
    BBS, and have used offline mail readers for years. Just wondering
    how/if a point would be "better" in some way. What can it do for me
    that I can't currently do with my OLR (MultiMail)?

    2. I'm interested (only) in software for Linux. A glance through the
    existing messages here would seem to indicate that 'OpenXP' is the
    point software of choice. Pretty much true? Any alternatives to
    that?

    Thanks for taking some time to provide me some info/advice, and I look
    forward to participating here.

    currently you've probably only received responses from the Zone 1 perspective view. But there are also others ...

    First is the historical view ...
    back in the 80's and 90's as Fidonet starts increasing, this was
    the before-internet-time ... all Zone 1 had the so called
    local-area-calls with zero addtl. fees using local phone calls.
    You could start a phone call at first of the month and could be
    online 24/7 until the last day of the month without any addtl.
    fee except the base fee you've paid for your telephone provider.

    In Zone 2 it was totaly different. Beside the base fee you had to
    pay monthly, you've paid for every call time based. So every
    online minute counted up to a total amount fee you had to pay to
    your phone provider. To get an idea, I've compared back in the
    late 80's ... 1 coke did cost 1 USD In Germany the one coke did
    cost 1 DM. In relation to the phone bill, you had to pay every 5
    minute approx 1 DM. To be one hour online, you had to pay addtl.
    6 DM.

    Wow, that's very interesting and something I did not know.

    Thats why BBS'sing becomes popular in the US but not in Europe.
    In Zone 2 you cannot calculate your online costs. Therefor, the
    Fidonet developed mechanisms to call a bossnode with minimum
    time, if the transfer speed becomes better, the less time was
    required to be online, that counts to your phone bill. Therefor
    Offline solutions spread in Zone 2 where in Zone 1 BBS'sing was
    your friend.

    Perhaps that is true, generally speaking. But I can tell you that for
    myself, back in the 90's, first as a user and then as a Sysop, I used
    the QWK/offline reader method. This was of course not related to trying
    to minimize my telephone costs, it was just more convenient and offered
    more options. Also, as a Sysop, in those days I only had one phone
    line, so did not want to busy up my incoming phone while I was reading
    and replying to messages on the BBS.

    As said, Offline solutions have been developed. One option was
    the QWK technique but this didn't only become popular be the
    users that are still most time online at BBS'ses. The Point
    solution becomes more popular in Zone 2 because each user still
    uses the technique, that connects different BBS'ses with mailers
    to exchange mails and files in the background.

    Point programs in the beginning uses exactly the same mailer,
    tossers, tickers, editors that Node system uses beside their
    running BBS

    Each BBS user works under the hood of a BBS sysop - mostly the
    Fidonet Node sysop. Fidonet technical they have no voice. Fidonet technical you have to apply for a nodenumber to get fidonet
    member and have becoming a voice. With a nodenumber, you can be
    uniquely identified by your fidonet aka. As QWK reader you're
    still running under your bossnodes main nodenumber. Starting with
    point you receive your unique Fidonet Point-AKA and becomes
    addressable in the fidonet.

    The are differences in the Point systems.
    Ones that are standalone systems (OpenXP, WinPoint) with their
    own dedicated messagebase structures.
    You cannot combine these message base with any known BBS systems
    message base or other fidonet compatible editors or tossers and
    tickers. They are standalone as is. Good for people who dont want
    continue to discover the world of Fidonet. Its only good to
    select some discussion channels, some fileechos and receive the
    traffic for them.

    The 2nd type of Point systems, are Point systems, that allow you
    to move forward with your journey to get a Fidonet Node member,
    add a BBS system to your running system, to play around with
    different tossers, tickers, netmail trackers. Playing around with
    a BBS system in the Background connected to your local
    messagebase that interchanges traffic with your bossnode. Once
    you've received the learning curve to apply for a Fidonet
    Nodenumber, you only switch the Pointnumber with your applied
    Nodenumber and continue running your system as before. With the
    mailer system you can also add othernets to your configuration to
    have a multilevel networking environment. With such a system
    you're probably able to switch from one OS system to another.
    Running BinkD mailer you can run your system on Windows, on
    Linux, on OS2 maybe others. One of such combination of mailer,
    tosser, editor as point starter kit is the BinkD, HPT, GoldEd
    package. For Linux Philip Giebel deployed the Fidian package.
    For Windows long time there was the Fidopoint-Paket-Deluxe
    available for Windows, but failed the switch from Windows 32bit
    to Windows 64bit The heart of this package is the universal
    Tosser with the ability to support different types of FTN
    compatible message bases. Therefor this solution is the
    open-forward system with the best effort if you want to continue
    with your fidonet journey

    Thank you for all that info, and for taking the time to write such an interesting and involved reply. For me still today, the BBS/QWK method
    is still my preferred method. I will continue to monitor this POINTS
    echo, and possibly try it again one day.

    Appreciate it, and take care!


    ... Gone crazy, be back later, please leave message.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.20-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)
  • From Martin Foster@2:310/31.3 to August Abolins on Sunday, June 11, 2023 10:59:00
    Hello August!

    *** Sunday 04.06.23 at 08:43, August Abolins wrote to Dan Clough:

    [snip]
    Sorry to hear that. It's been a while (4 years now?) since I
    first launched OPX. My first version was many interations
    prior to the current version. I don't recall anything "less
    intuitive" about it. However, I *did* have the advantantage of
    a USER's GUIDE that a fellow OXP User/Tester wrote. That guide
    might still be helpful to a certain degree. I'd recommend you
    take a look at it. See https://openxp.uk/doc/

    That document is included in the distribution archive and if he still has
    the Linux version of OpenXP installed, he already has oxpguide.pdf on his system in /usr/local/lib/openxp/doc

    The document is well out of date but probably most of it is still relevant
    to the current version of OpenXP. Notable exceptions would be session/
    packet password configuration and nodelist/pointlist handling.

    Regards,
    Martin

    --- OpenXP 5.0.57
    * Origin: Bitz-Box - Bradford - UK (2:310/31.3)
  • From Flavio Bessa@4:801/188 to Dan Clough on Thursday, April 25, 2024 12:53:18
    On 31 May 2023, Dan Clough said the following...

    Just started following this echo, as I may have an interest in setting
    up a point for reading mail. I have a few questions, and apologize if they've been asked before, which I'm sure they have...

    Sure, I will give you my five cents on it.

    1. What pros/cons are there to using a Point, versus reading/writing echomail directly on a BBS, or with an Offline Reader. I operate a BBS, and have used offline mail readers for years. Just wondering how/if a point would be "better" in some way. What can it do for me that I can't currently do with my OLR (MultiMail)?

    Essentially? Nothing, I would say. The only difference between having a point and using online reading/offline mail client is that the connection with the BBS is almost instantaneous - You poll the BBS, get the mail, answer, send your outbound mail, and that is it. You don't need to log in to a system to do so.

    2. I'm interested (only) in software for Linux. A glance through the existing messages here would seem to indicate that 'OpenXP' is the point software of choice. Pretty much true? Any alternatives to that?

    Yes, look for FidoOverIP packages, or you can try some combination of binkp+crashmail+Golded, which are the most known alternatives. Personally, I do not like OpenXP interface.

    Thanks for taking some time to provide me some info/advice, and I look forward to participating here.

    Hope my five cents have been useful.

    Regards,
    Flavio

    ... Evil triumphs when good people do nothing. - Einstein

    --- Mystic BBS v1.12 A48 (macOS/64)
    * Origin: Saturn's Orbit BBS - Back from the ashes (4:801/188)
  • From August Abolins@2:221/1.58 to Flavio Bessa on Thursday, April 25, 2024 18:43:00
    Hello Flavio!

    Personally, I do not like OpenXP interface.

    For me, it took a little while to grow accustomed to where
    things are and how to navigate. I still get the TAB and S
    controls confused and what they do at different screens.

    The message editor is superb, imho.

    The message database system is ideal for people who may want to
    save particular messages and look thing up easily (the search
    options are quite versatile).

    Once it's all configured with a boss/point information, the
    poll is as simple as N A <CR>

    --
    ../|ug

    --- OpenXP 5.0.58
    * Origin: The ONLY point that matters! --> . <-- (2:221/1.58)
  • From Dan Clough@1:135/115 to Flavio Bessa on Thursday, April 25, 2024 19:54:00
    Flavio Bessa wrote to Dan Clough <=-

    On 31 May 2023, Dan Clough said the following...

    Just started following this echo, as I may have an interest in setting
    up a point for reading mail. I have a few questions, and apologize if they've been asked before, which I'm sure they have...

    Sure, I will give you my five cents on it.

    1. What pros/cons are there to using a Point, versus reading/writing echomail directly on a BBS, or with an Offline Reader. I operate a BBS, and have used offline mail readers for years. Just wondering how/if a point would be "better" in some way. What can it do for me that I can't currently do with my OLR (MultiMail)?

    Essentially? Nothing, I would say. The only difference
    between having a point and using online reading/offline mail
    client is that the connection with the BBS is almost
    instantaneous - You poll the BBS, get the mail, answer, send your
    outbound mail, and that is it. You don't need to log in to a
    system to do so.

    2. I'm interested (only) in software for Linux. A glance through the existing messages here would seem to indicate that 'OpenXP' is the point software of choice. Pretty much true? Any alternatives to that?

    Yes, look for FidoOverIP packages, or you can try some
    combination of binkp+crashmail+Golded, which are the most known alternatives. Personally, I do not like OpenXP interface.

    Thanks for taking some time to provide me some info/advice, and I look forward to participating here.

    Hope my five cents have been useful.

    Thanks, Flavio, for the feedback. This question I asked was 11 months
    ago... and I've definitely decided that I'll stay with the Offline Reader approach. It's something I'm used to, and MUCH simpler. ;-)

    Appreciate the reply.



    ... Gone crazy, be back later, please leave message.
    === MultiMail/Linux v0.52
    --- SBBSecho 3.20-Linux
    * Origin: Palantir * palantirbbs.ddns.net * Pensacola, FL * (1:135/115)