• bbs.atcodes()

    From deon@1:103/705 to Digital Man on Saturday, April 30, 2022 22:17:42
    Hey DM,

    I've been playing with bbs.atcodes(), and I've noticed the following:

    synchronet: term Node 1 <X> Replacing [@DATETIME-L15@] with [Sat Apr 30 2022] synchronet: term Node 1 <X> Replacing [@TIME-L8@] with [09:42 pm]

    synchronet: term Node 1 <X> Replacing [@DATETIME<pipe>L15@] with [null] synchronet: term Node 1 <X> Replacing [@TIME<pipe>L8@] with [null]

    synchronet: term Node 1 <X> Replacing [@STATS.LTODAY-Z2@] with []
    synchronet: term Node 1 <X> Replacing [@STATS.TTODAY-Z2@] with []

    synchronet: term Node 1 <X> Replacing [@STATS.LTODAY@] with [5]
    synchronet: term Node 1 <X> Replacing [@STATS.TTODAY@] with [31]

    ie:

    If I use the pipe delimiter (I'm using the word <pipe> above only in this message), I'm getting "null" instead of the value (it works with the dash delimiter).

    For the STATS<dot>XXX I'm getting nothing returned (regardless of whether I use a dash or pipe delimiter), but I do get a return if I remove the delimiter altogether.

    This is: JSexec v3.19c-Linux master/c0f42027d

    I think bbs.atcodes() is not working correct, am I on the wrong track?


    ...ëîåï

    ---
    þ Synchronet þ Alterant | an SBBS in Docker on Pi!
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)
  • From Digital Man@1:103/705 to deon on Saturday, April 30, 2022 12:08:40
    Re: bbs.atcodes()
    By: deon to Digital Man on Sat Apr 30 2022 10:17 pm

    Hey DM,

    I've been playing with bbs.atcodes(), and I've noticed the following:

    synchronet: term Node 1 <X> Replacing [@DATETIME-L15@] with [Sat Apr 30 2022] synchronet: term Node 1 <X> Replacing [@TIME-L8@] with [09:42 pm]

    synchronet: term Node 1 <X> Replacing [@DATETIME<pipe>L15@] with [null] synchronet: term Node 1 <X> Replacing [@TIME<pipe>L8@] with [null]

    synchronet: term Node 1 <X> Replacing [@STATS.LTODAY-Z2@] with [] synchronet: term Node 1 <X> Replacing [@STATS.TTODAY-Z2@] with []

    synchronet: term Node 1 <X> Replacing [@STATS.LTODAY@] with [5]
    synchronet: term Node 1 <X> Replacing [@STATS.TTODAY@] with [31]

    ie:

    If I use the pipe delimiter (I'm using the word <pipe> above only in this message), I'm getting "null" instead of the value (it works with the dash delimiter).

    That's expected: bbs.atcode() does not support the formatting modifiers.

    For the STATS<dot>XXX I'm getting nothing returned (regardless of whether I use a dash or pipe delimiter), but I do get a return if I remove the delimiter altogether.

    Same answer: you can't use the format modifiers with bbs.atcode().

    This is: JSexec v3.19c-Linux master/c0f42027d

    Are you sure about that? JSexec doesn't instantiate the 'bbs' object, so that seems unlikely. But no matter, it's not an sbbs-version issue.

    I think bbs.atcodes() is not working correct, am I on the wrong track?

    Working as expected.
    --
    digital man (rob)

    Synchronet/BBS Terminology Definition #51:
    MODEM = Modulator/Demodulator
    Norco, CA WX: 77.2øF, 43.0% humidity, 10 mph E wind, 0.00 inches rain/24hrs
    --- SBBSecho 3.15-Linux
    * Origin: Vertrauen - [vert/cvs/bbs].synchro.net (1:103/705)