1. Forum
  2. USENET
  3. comp.sys.mac.system

  • Re: G4 will deep sleep, but not automatically

    From Phil Lefebvre@p-lefebvre@GOnorthwestern.edu to comp.sys.mac.system on Wednesday, July 23, 2003 20:37:53
    From Newsgroup: comp.sys.mac.system

    In article <melcom-54F047.20312622072003@shawnews.vc.shawcable.net>,
    Mel Comisarow <melcom@chem.ubc.ca> wrote:

    MY DP450 has the same problem that Steve Kan's DP450 has. I had an
    Adaptac 2930 SCSI board installed that I quit using when I replaced my
    Jaz and Syquest SCSI drives by a Firewire CD burner. So I removed the
    SCSI board and any file that had Adaptec in its name. Same old problem.

    Are their other files witaout Adaptec in their name, which were
    necessary for proper Adaptec 2930 operation that I could now remove?

    Actually, the latest drivers should allow deep sleep with the 2930. I
    have a 2930 in my Dual 1 GHz and deep sleep works fine. Regardless, once
    you pull the card the drivers won't load, so that is not your problem.

    --
    Chicago, IL
    Remove "GO" to reply.
    --- Synchronet 3.18b-Win32 NewsLink 1.113