Hi all,
Its been quite a while since I did any maintenance on my BBS. 8-( Life getting in the way 8-(
I suspect something is amiss with my Syncronet BBS list, it only lists 24 systems
Yet when it sorts it counts around 229 entires.
I re-added the entry for my BBS, (keep forgetting to Validate it). and it is there along with the other 23 systems.
When I logged on to Digital Distraction it was not listed however?
How many active systems do you guy's see?
For some reason I had SYNCDATA in both my Fido config and DOVE-net configs, but I have now removed the Fido one.
Is there som way I can tell sbl to clear its data and rescan SYNCDATA for active systems?
I ran the sbl maint script, but I still only see 24 entries?
Re: sbl
By: Geo to All on Thu Apr 30 2015 11:40 am
Hi all,
Its been quite a while since I did any maintenance on my BBS. 8-( Life getting in the way 8-(
I suspect something is amiss with my Syncronet BBS list, it only lists 24 systems
Yet when it sorts it counts around 229 entires.
I re-added the entry for my BBS, (keep forgetting to Validate it). and it is
there along with the other 23 systems.
When I logged on to Digital Distraction it was not listed however?
How many active systems do you guy's see?
For some reason I had SYNCDATA in both my Fido config and DOVE-net configs,
but I have now removed the Fido one.
Is there som way I can tell sbl to clear its data and rescan SYNCDATA for active systems?
If you delete or rename your sbl.dab file, that will "clear its data", but also
any locally-created entries. If you delete data/subs/syncdata.sbl, then the next smb2sbl run will rescan the entire SYNCDATA sub-board for BBS entries.
I ran the sbl maint script, but I still only see 24 entries?
How many messages are in your SYNCDATA sub-board? Are they current (e.g. what's
the date of the last "SBL" message posted)?
digital man
Synchronet "Real Fact" #72:
SyncTERM (created by Deuce) contains portions of Synchronet and SEXYZ code. Norco, CA WX: 90.7øF, 15.0% humidity, 10 mph SE wind, 0.00 inches rain/24hrs
Re: sbl
By: Digital Man to Geo on Thu Apr 30 2015 14:26:21
Hi DM,
Thanks for the reply.
Yep tried all that, I now show only 16 entries in the sbl. Surely we have more than that? 8-)
The most recent is msg 25 about THE TARDIS BBS posted today.
Do you think I should log in to VERT and reset the QWK scan of my SYNCDATA to something low?
chksmb passes ok too.
smb details below 8-)
Re: sbl
By: Geo to Digital Man on Fri May 01 2015 11:12 am
Re: sbl
By: Digital Man to Geo on Thu Apr 30 2015 14:26:21
Hi DM,
Thanks for the reply.
Yep tried all that, I now show only 16 entries in the sbl. Surely we have more than that? 8-)
The most recent is msg 25 about THE TARDIS BBS posted today.
Do you think I should log in to VERT and reset the QWK scan of my SYNCDAT to something low?
chksmb passes ok too.
smb details below 8-)
You only have 25 messages in SYNCDATA? Something seems off there. What do yo have your max msgs set for that sub? You should have hundreds or thousands o messages in SYNCDATA by now.
digital man
Synchronet "Real Fact" #66:
SEXYZ is as a 32-bit replacement for [F]DSZ, CE-XYZ and other protocol drive Norco, CA WX: 73.9øF, 33.0% humidity, 5 mph SE wind, 0.00 inches rain/24hrs
Re: sbl
By: Digital Man to Geo on Thu Apr 30 2015 22:48:06
Hi again DM,
Yeah I know, thats what makes it so weird, I know it used to have hundreds of entries. The sub is set to MAX msgs of 1000
Scratching head!!!
Re: sbl
By: Geo to Digital Man on Fri May 01 2015 09:43 pm
Re: sbl
By: Digital Man to Geo on Thu Apr 30 2015 22:48:06
Hi again DM,
Yeah I know, thats what makes it so weird, I know it used to have hundred of entries. The sub is set to MAX msgs of 1000
Scratching head!!!
Is it enabled in your new-scan on VERT? What's the date of the most recent message?
digital man
Synchronet "Real Fact" #48:
Synchronet program was named 'sbbs' instead of 'sync' to avoid conflict w/Un Norco, CA WX: 83.0øF, 26.0% humidity, 9 mph ESE wind, 0.00 inches rain/24hrs
Re: sbl
By: Digital Man to Geo on Sat May 02 2015 15:21:30
Hi DM
Yep Scan is enabled on VERT.
Latest msg is today.
I just set the new msg scan pointer on VERT to -1000 msgs and did a QWK run. The SBL now shows 58 Systems, is that ~ correct?
For some reason Tardis is in tere multiple times though.
Prehaps I should del the sub and clear the sbl and then reset the scan pointer on VERT?
Re: sbl
By: Geo to Digital Man on Sun May 03 2015 05:43 pm
Re: sbl
By: Digital Man to Geo on Sat May 02 2015 15:21:30
Hi DM
Yep Scan is enabled on VERT.
Latest msg is today.
I just set the new msg scan pointer on VERT to -1000 msgs and did a QWK r The SBL now shows 58 Systems, is that ~ correct?
Sounds about right. I think I have 5000 messages in that area on Vertrauen, it's possible you're missing some older ones.
For some reason Tardis is in tere multiple times though.
Maybe it was created on multiple systems.
Prehaps I should del the sub and clear the sbl and then reset the scan pointer on VERT?
Sure. Over time, your database should become current and match most others t have their settings set the same (e.g. days before deletion of unvalidated entries).
digital man
Synchronet "Real Fact" #19:
Michael Swindell was directly responsible for Synchronet's commercial succes Norco, CA WX: 66.6øF, 58.0% humidity, 10 mph ESE wind, 0.00 inches rain/24hr
Sysop: | Gate Keeper |
---|---|
Location: | Shelby, NC |
Users: | 750 |
Nodes: | 20 (0 / 20) |
Uptime: | 04:17:04 |
Calls: | 10,873 |
Calls today: | 7 |
Files: | 5,288 |
D/L today: |
1 files (36K bytes) |
Messages: | 510,706 |