Hi !
I've installed Synchronet 3.18 , and configured the FidoNet using Binkt .
Every time an event happens, the SBBS Services consumes more than 50% of the system CPU ( i've even used a last-gen Core i7 as host, and the issue persist ), now the VM is running on its official host a Dual Xeon 5460 based server ( should be more than enough ) , the VM is set for 4 vCPU and 4GB of memory.
I've tried using Windows XT, Windows 2003, Windows 2008 and now Windows 2012R2 all had the same behavior, when it start a Binkt event it uses almost all CPU available after finishing the exchange process.
Using the Process Explorer i see that the sbbsNTsvcs appears to be in some kind of loop , on the Microsoft C Runtime
Start Address ucrtbase.DLL!_crt_at_quick_exit+0x20 ( this "loop" is using the 50+ cpu resources according the process explorer )
Restarting the comm services solves the problem until the next event get into place.
Have anyone seen this kind of behavior ? or have any tips where i can research/fix this issue ?

Regards,

Alexandre F.S.Figueiredo

---
þ Synchronet þ SoftSolutions - telnet://bbs.softsolutions.net.br:2023

Re: High CPU usage in sbbsNTsvcs
By: Afsfigueiredo to All on Fri Apr 09 2021 07:48 am

Hi !
I've installed Synchronet 3.18 , and configured the FidoNet using Binkt . Every time an event happens, the SBBS Services consumes more than 50% of the system CPU ( i've even used a last-gen Core i7 as host, and the issue persist ), now the VM is running on its official host a Dual Xeon 5460 based server ( should be more than enough ) , the VM is set for 4 vCPU and 4GB of memory.
I've tried using Windows XT, Windows 2003, Windows 2008 and now Windows 2012R2 all had the same behavior, when it start a Binkt event it uses almost all CPU available after finishing the exchange process.
Using the Process Explorer i see that the sbbsNTsvcs appears to be in some kind of loop , on the Microsoft C Runtime
Start Address ucrtbase.DLL!_crt_at_quick_exit+0x20 ( this "loop" is using the 50+ cpu resources according the process explorer )
Restarting the comm services solves the problem until the next event get into place.
Have anyone seen this kind of behavior ? or have any tips where i can research/fix this issue ?

No, that's not normal at all. This isn't the correct message area for Synchronet support questions, but in general: the log output from binkit should give you some indication of what's going on and the cause of the high CPU utilization.

Dream Master mentioned a high CPU utilization issue with BinkIt recently, but then said he resolved it, though I don't know what the problem or solution was with any detail. <shrug>
--
digital man

This Is Spinal Tap quote #11:
Nigel Tufnel: No. no. That's it, you've seen enough of that one.
Norco, CA WX: 75.8øF, 38.0% humidity, 7 mph NE wind, 0.00 inches rain/24hrs

---
þ Synchronet þ Vertrauen þ Home of Synchronet þ [vert/cvs/bbs].synchro.net

Re: High CPU usage in sbbsNTsvcs
By: Digital Man to Afsfigueiredo on Fri Apr 09 2021 05:13 pm

Dream Master mentioned a high CPU utilization issue with BinkIt recently, but then said he resolved it, though I don't know what the problem or solution was with any detail. <shrug>

The high cpu utilization issue is a configuration issue within sbbsecho.ini. I effectively rebuilt my sbbsecho.ini and the problem went away. Also, make sure tickit.ini is well maintained. A lot of the problems is *not reading the directions verbatim*. :)

Brian Klauss <-> Dream Master
Caught in a Dream | caughtinadream.com a Synchronet BBS

---
þ Synchronet þ Caught in a Dream - caughtinadream.com

Re: High CPU usage in sbbsNTsvcs
By: Dream Master to Digital Man on Fri Apr 09 2021 23:49:58

By: Digital Man to Afsfigueiredo on Fri Apr 09 2021 05:13 pm

Dream Master mentioned a high CPU utilization issue with BinkIt recently, but then said he resolved it, though I don't know what the problem or solution was with any detail. <shrug>

The high cpu utilization issue is a configuration issue within sbbsecho.ini effectively rebuilt my sbbsecho.ini and the problem went away. Also, make s tickit.ini is well maintained. A lot of the problems is *not reading the directions verbatim*. :)

Brian Klauss <-> Dream Master

Hi ! Thanks ! I'll review those and read the wiki all over. If i'm unable to fix or have any doubts, i'll move this to the right forum . Thanks for your support :)

You know... recall/relearn tech i dont use since 1993 merging with "modern" tech takes some time ;)




AFSFigueiredo

---
þ Synchronet þ SoftSolutions - telnet://bbs.softsolutions.net.br:2023