I am unable to boot-up my Apple G3 B&W from any external SCSI HDD.
The ext. HDD's icon mounts on the desktop when not used as a boot up drive. However when the HDD is forced as a boot up drive, the G3 will not start up from the external HDD. (SCSI ID and termination are all OK)
I have tried several HDDs and it's the same with all of them.
The same external HDD boots up successfully from my older beige Apple but
not from the G3!
I am beginning to suspect it could be a software driver problem.
Hardware is a G3 Blue & White (OS9.2.2) with an Advansys PCI SCSI card "ASB 3940ua Rev.2" All external HDDs have OS9.2.2.
Can you suggest what I should do? Anyone using the same SCSI card?
Any help sincerely appreciated.
Thanks
Jerry
I am beginning to suspect it could be a software driver problem.
swler wrote:
I am beginning to suspect it could be a software driver problem.
Since you cross-posted this to 5 apple II newsgroups and ZERO mac
newsgroups, I think it could be a user intelligence problem!
************************************
Chris Merrill
st.ng1@christophermerrillZZZ.net
(remove the ZZZ to contact me)
************************************
Chris,
That was just plain rude and obnoxious.
My news reader uses a smaller font on a large resolution screen.Lately the
OS doesn't want to save any setting changes. Sometimes I have to take a second look at the words. This was one case. At first I thought the last three words were "rude and obvious". ;-)
| Sysop: | Gate Keeper |
|---|---|
| Location: | Shelby, NC |
| Users: | 1,141 |
| Nodes: | 20 (0 / 20) |
| Uptime: | 497142:39:47 |
| Calls: | 16,555 |
| Calls today: | 1 |
| Files: | 5,718 |
| D/L today: |
8 files (8,192P bytes) |
| Messages: | 697,905 |